Wellis InClear V2 Chemical Package
What it does
The in.Clear V2 system generates active bromine on demand from a dissolved sodium bromide reservoir. This package provides the bromide salt charge plus the supporting chemistry (alkalinity, pH balance, test strips) needed for first commissioning.
When to use
- Initial setup of an in.Clear V2 equipped Wellis spa.
- After a full quarterly drain & refill on an in.Clear spa.
How to use
- Fill the spa via Pure Fill (and Pure Stream if hard water).
- Balance alkalinity (80–150 ppm), then pH (7.2–7.8).
- Add the BromiCharge dose per the included instructions.
- Allow 24 hours for full dissolve.
- Activate the in.Clear cell.
- Test bromine level with the included strips and adjust the in.Clear output level.
NOT compatible with chlorine sanitisation. For chlorine setups, use the Standard or Premium Chemical Package instead.
⚠ Important — please read before use: Always follow the dosing instructions printed on the product label and on the Safety Data Sheet (SDS) supplied with the chemical. Consult your Wellis spa user manual for product-specific water-care guidance applicable to your model, water source, and usage pattern. Never mix water-care chemicals together directly — always add each product separately to circulating spa water with the pump running. The information on this page is provided as general guidance only and does not replace the manufacturer's instructions or professional advice. TwoRelax accepts no liability for damage, injury, water-quality issues, or equipment failure resulting from incorrect use, improper dosing, mixing of incompatible products, or failure to follow the manufacturer's instructions.