Wellis Crystal Bromine Salt (Bromicharge 2.2 kg)
What it does
Provides the bromide reservoir that the in.Clear cell uses to generate fresh bromine sanitiser inside the spa. Bromine is gentler than chlorine, with no chlorine smell, and works well at higher temperatures.
When to use
- Initial setup of an in.Clear-equipped spa.
- Top up monthly as bromide is consumed by sanitisation cycles.
- Refill when in.Clear "low salt" alarm is triggered.
How to use
- Confirm your spa has an in.Clear V2 generator (this product does NOT work with chlorine systems).
- Pre-dissolve the dose in a bucket of warm water.
- Pour slowly into the spa with circulation ON.
- Allow 24 hours for the salt to fully dissolve and distribute.
- Activate the in.Clear cell per its manual.
⚠ Important — please read before use: Always follow the dosing instructions printed on the product label and on the Safety Data Sheet (SDS) supplied with the chemical. Consult your Wellis spa user manual for product-specific water-care guidance applicable to your model, water source, and usage pattern. Never mix water-care chemicals together directly — always add each product separately to circulating spa water with the pump running. The information on this page is provided as general guidance only and does not replace the manufacturer's instructions or professional advice. TwoRelax accepts no liability for damage, injury, water-quality issues, or equipment failure resulting from incorrect use, improper dosing, mixing of incompatible products, or failure to follow the manufacturer's instructions.